Sulfur ultrafine grinding solution

2017-04-28

Sulfur or sulphur (see spelling and etymology) is a chemical element with symbol S and atomic number 16. It is abundant, multivalent, and nonmetallic. Under normal conditions, sulfur atoms form cyclic octatomic molecules with a chemical formula S8. Elemental sulfur is a bright yellow crystalline solid at room temperature. Chemically, sulfur reacts with all elements except for gold, platinum, iridium, tellurium, and the noble gases.

Though sometimes found in pure, native form, sulfur usually occurs as sulfide and sulfate minerals. Being abundant in native form, sulfur was known in ancient times, being mentioned for its uses in ancient India, ancient Greece, China, and Egypt. In the Bible, sulfur is called brimstone. Today, almost all elemental sulfur is produced as a byproduct of removing sulfur-containing contaminants from natural gas and petroleum. The greatest commercial use of the element is the production of sulfuric acid for sulfate and phosphate fertilizers, and other chemical processes. The element sulfur is used in matches, insecticides, and fungicides. Many sulfur compounds are odoriferous, and the smells of odorized natural gas, skunk scent, grapefruit, and garlic are due to organosulfur compounds. Hydrogen sulfide gives the characteristic odor to rotting eggs and other biological processes.

Sulfur is an essential element for all life, but almost always in the form of organosulfur compounds or metal sulfides. Three amino acids (cysteine, cystine, and methionine) and two vitamins (biotin and thiamine) are organosulfur compounds. Many cofactors also contain sulfur including glutathione and thioredoxin and iron–sulfur proteins. Disulfides, S–S bonds, confer mechanical strength and insolubility of the protein keratin, found in outer skin, hair, and feathers. Sulfur is one of the core chemical elements needed for biochemical functioning and is an elemental macronutrient for all organisms.

grinder

The ACM/C series grinders are the result of our latest innovations (Patent Registration No.20031056858) and are specially designed for grinding heat sensitive materials. The range contains special grinding accessories/devices and features a coarse material re-grind system as well as are-blowing machinism. Specific features of the C series are as follows:

1. Ability to grind brittle materials that are prone to over-grinding, producing a "coarse" (d97>140μm), i.e. blow mesh 100) finished product with consistent granule size and even distribution. Suitable for grinding materials such as polyvinyl alcohol (PVA), with more than 80% of the total amount of retention for the neighbouring three sifting numbers (i.e. sifting meshes 40,60 and 80).

2. Has a re-blowing device, suitable for grinding heat sensitive chemical materials (such as PVA), ensuring that their properties will not deteriorat due to the temperature generated during grinding. This reduces the chance of materials forming spheres caused by high speed spinning and fricton-spherical materials are much harder to grind.

3. The granule size of the product is adjustable by adjusting the gaps between the grinding accessories/devices. The machine is capable of grinding both coarse materials (below mesh 100) and fine materials (above mesh 100).

4. Low cost-priced at less than 30% of similar imported machines.


The machine is suitable for grinding coarse or fine heat sensitive materials, capable of producing consistent granule size. It is therefore widely used in chemical, agro-chemical, foodstuffs, starch and Polyvinyl Alcohol production industries. These machines have demonstrated very stable performance and good reliability as evidenceed by a large number of installations in China's leading vinylon plants, silicon gel plants, and starch processing facilities, having completely replaced similar imported machine.

The machine's main inner linings, whirlwind separator device, dust remover and pipe system are made of either alloyed carbon steel or stainless steel, depending on the specific industry for which the machines to be used.

1. Our design idea is market-oriented and its goal is to increase customers’ satisfaction. Design according to the customers’ special requires. Achieve the perfect combination of rational investment and lower cost.
2.  According to related national standard strictly, we guarantee stable and reliable product quality with superb technique and technology.
3.  Control the production and examination of the parts and the whole machine strictly.
4.  The period of quality guarantee of the equipment is one year, but the whole machine is maintained for whole life. If we receive complaint from customers, we will respond immediately. And if necessary, we will send someone to the field at once.
5.  When technical breakthrough and improvement happen, we will do the correction and upgrade for customers with cost price only if customers will.
6.  Supply the blueprint of the product line and equipment details for free.


本网站由阿里云提供云计算及安全服务 Powered by CloudDream